Cindy Pro 124
The Cindy Pro is especially designed for lightweight riders. This board is the result of symbiotic cooperation between our world champion Cindy Mosey and shaper legend Adrian Roper of Underground. The Cindy Pro feels perfect in the water. With a length of 124 cm and a width of 34 cm it is a perfect toy for all youngsters, leightweights and water women. A narrow stance and flat 3D pads offer optimum comfort. Four TFC replicas provide a good grip and the necessary float. An aluminum EVA grab handle permits board-off tricks.
Length: 124cm
Width: 34cm
Weight: 1,8kg
Volume: 5 l
Core: PVC Core
Technology: Flex Tip Construction
Fin Setting: 4 x 5cm TFC Fins
Footstrap: 2 x Asymmetrical
Foodpad: 3D Foodpads
Shaper: Underground
Specials: Flex Tips, EVA Grab Handle, Grab Stripe 
  
 
 M1 148
With a length of 148 cm and a width of 39 cm, the M1 is a classical mutant. It’s shape is designed for a wide range of use. The board’s name M1 is also stands for “absolute multi-talent”. The reliable mutant fin setup provides perfect grip for jumps and good upwind performance. The large surf-style rear fins are great for serious wave riding. Or do you prefer cruise-carving in flat water? No problem! As a true multi-talent the M1 can handle all sorts of conditions! 
The large footpad together with symmetrical North footstraps help you to stay on board during the craziest maneuvers.
Length: 148cm
Width: 39cm
Weight: 2,5kg
Volume: 10l
Core: PVC Core
Technology: Flex Tip Construction
Fin Setting: 2 x 3cm, 2 x Halfmoon, 2 x Surffin
Footstrap: 2 x Symmetrical
Foodpad: 2 Large 8mm Pads
Shaper: John Amundson
Specials: Flex Tips, EVA Grab Handle, Grab Stripe

 
M2 125
Da The M2 125 is the new mutant of top kiter Will James. The name is derived from “mutated mutant”. Similar to a bi-directional board, the M2 has only four fins but the footstraps are placed off-center. This setup creates the sensation of one stronger side.
The rails play an important role for this short board’s riding characteristics. Its four G10 fins provide the necessary grip for launching and landing big airs. Born in Hawaii, the M2 is great for riding huge waves and carves perfect bottom turns! The scoop rocker line is perfectly adapted to the 3 cm TFC front fins and almost completely eliminates the danger of catching at the front. The board is extremely easy to ride backwards and therefore ideal for all kinds of switchstance tricks.
The M2 has grab channels at the sides for no foot stunts without a grab handle. An aluminum EVA grab handle is also available for those who like it a bit less extreme.

Length: 125cm
Width: 36cm
Weight: 2,0kg
Volume: 5,2 l
Core: PVC Core
Technology: Flex Tip Construction
Fin Setting: 2 x 3cm, 2 x 6cm TFC
Footstrap: 2 x Symmetrical
Foodpad: 2 Large 8mm Pads
Shaper: John Amundson
Specials: Flex Tips, EVA Grab Handle, Grab Stripe
 

M1 & M2 & Cindy Pro
These models are produced with the Custom Topsheets Technology developed by NKB. The entire cores are CNC cut for maximum precision. For a clear definition of flex, each side of these boards is composed of four layers of 0/90 glass fiber applied in different orientations. The deck contains special Wood Sandwich Stringers that provide the necessary stiffness at the board’s center and ensure sufficient strength. The snowboard topsheets at the base and at the top make the board very durable.
M1&M2
 
 

Cindy
 
Construction:
• PVC Core
• 4 Layers of Multi Direct Fiber
• Wood Sandwich Stringers
• Snowboard Bottom
 

 
Jaime Pro 128
Due to its flat scoop rocker line (the curve along the bottom of the board) the Jaime Pro 128 has  incredible early planing properties. Its short length ensures direct response and good control even in overpowered situations. In low wind conditions the Jaime Pro 128 retains good upwind capabilities and efficiently translates the kite’s lateral pull into fast forward movement. Four G10 fins in the foot area provide nothing but a perfect grip. Fast edging creates a skateboard-like ollie pop for take-offs. Only flying fish can do it better!
An entirely new technology is used to build this board. With the Jaime Pro 128 North managed to produce a board that weighs less than 2 kg (!) in series production. The key to reconcile this extremely low weight with very high durability are its x-carbon stringers.
The new rail and deck technology adds enormous stability and further enhances the boards durability. The Jaime comes with very comfortable North footstraps, a thin but soft 3D footpad and an aluminum EVA grab handle.
Length: 128cm
Width: 37,5cm
Weight: 2,0kg
Volume: 4l
Core: PVC Core
Technology: Step Cap Construction
Fin Setting: 4 x 6cm TFC Fins
Footstrap: 2 x Asymmetrical
Foodpad: 3D Foodpads
Shaper: Ovidio
Specials: Flex Tips, X Carbon Stringer, EVA Grab Handle
 
 
 
 

 
Technology:
Jaime Pro
The technology used for making the new Jaime Pro was derived from snowboard construction. The board is baked at approximately 95° C under a pressure of 85 tons. This technology permits the construction of  very light, yet extremely durable boards.
Construction:
• Triax Fiber
• X-Carbon-Kevlar Strips
allows us to clearly define flex and torsional rigidity and create different levels of stiffness in the frontside and heelside edge.
Heelside = high torsional stiffness   => maximum grip
Frontside = soft flex    => waveriding, easy turning, soft landing
 
 
 
 
 
• ABS – Protection Sidewall
• Wood Sandwich Heel Reinforcement
• Snowboard Bottom and Top
 
 
Defender
 
The Defender’s flat rocker allows early planing and its flexible tips ensure good board control even in high wind conditions. Due to their very soft and even outline these boards are very easy to control and ride. The thin tucked under rails guarantee easy rail placement.
A new technology is used for making the Defenders. The deck features a tried and tested custom construction with a fine paint finish while the base is protected by a robust top sheet construction. The new 3D footpads together with the soft ergonomic footstraps offer perfect support and maximum comfort. As the boards’ high quality demands the use of equally fine fins we chose to equip them with eight TFC G10 fins. The eight fin setup ensures superior hold not only on the heel side but also in bottom turns and radical jibes. All boards come with inserts for a grab handle.
The Defender 57 is the biggest Defender model and will convince every bidi newcomer with its incredible upwind capabilities. Due to its excellent gliding properties the “wide” Defender is the ideal weapon for heavy riders in light wind conditions.
Shaper: John Amundson, Hawaii
Der Defender 50 a true all-round talent. With its good upwind capabilities and its soft and controlled handling this board is great to ride under a wide range of conditions. Riders will feel comfortable on a Defender 150 in light wind conditions as well as at higher wind speeds.
Shaper: John Amundson, Hawaii
The small Defender 43 is the most extreme board in the Defender line. It combines the radical riding properties of the pro models with the characteristic versatility of the Defenders.
Shaper: John Amundson, Hawaii
 
 
 
 
 

 
Dragon
With the Dragon Line North Kiteboarding is again setting new standards in kiteboarding. This uncompromising product line is targeted specifically at advanced riders and features a variety of innovations.
First of all, the V Flip Tip offers unprecedented grip. Secondly, it avoids dipping of the nose or tail in landings, when launching and in choppy water. The Dragon’s construction is unique too. The deck is made in conventional custom construction with a fine paint finish while the base is protected by an extra durable top sheet construction.
All Dragons come with eight G 10 fins shaped by TFC, 3D footpads, ergonomic footstraps and a grab handle. A grab strip directly above the rail permits the craziest board off tricks.
The Dragon L is a radical board for low to moderate wind speeds. Its constant scoop rocker and its large gliding surface allow early planing and high top speed. Its almost straight  outline and slightly tucked rails provide good hold in the water.
Shaper: John Amundson, Hawaii
The Dragon S is the most radical model of the North board range and will be used in competitions by our teamriders. Maximum edge grip due to its very thin, tucked in rails together with a round outline and constant flex offer excellent control and riding comfort, particularly in rough conditions.
 
Shaper: John Amundson, Hawaii